Tough Guy® Floating Barriers
The floating turbidity barrier is designed to restrict the flow of silt laden runoff from construction or other erodable sites, keep it contained in a limited area, and allow the silt and sediment to settle out before being carried into adjacent or connecting watercourses. Tough Guy® .DOT Series Floating Barriers are constructed of 18oz vinyl-polyester fabrics, (a 22 oz fabric is optional) to meet all known state specifications. Tough-Guy® .e Series Floating Barriers are identical to their .DOT counterparts, except for the fabric, which is a lighter 15oz vinyl-polyester. All Tough-Guy® Floating Barriers have sealed hems and seams for unmatched longevity and durability. |
|
| Type 1 is the most frequently specified barrier in the Tough-Guy® line. It is recommended for construction sites located in protected areas that are exposed only to light winds and to current velocities of less than one foot per second. This type of site may include ponds, shallow lakes, small streams and marshes. Type 1 features 6in x 6in x 4ft flotation logs. |
Type 1 Barrier |
| Type 2 is the work horse of the Tough-Guy® line. It has a top load cable and special stress plates for reinforcing the corners and is designed to handle more severe conditions. It is recommended for lakes, streams, inter coastal and tidal areas where current velocities up to five feet per second are expected. Type 2 feature 8in x 8in x 4ft flotation logs. |
Type 2 Barrier |
| Type 3 is a special adaptation of the Type 2 barrier. Approximately 20% of the area of the barrier skirt fabric is replaced with a polypropylene filter fabric conforming to some State DOT specifications. The filter fabric is inserted to reduce the pressure on the curtain while retaining silt. |
Type 3 Barrier |
| Tough-Guy®.DOT Series are made using
an 18oz vinyl-polyester fabric. Some states, like Minnesota for example,
require the optional 22oz fabric. |
Anchor Kits include everything you need to secure Tough-Guy® Floating Barriers: Anchor, Rope, Chain, Shackles, Thimbles and Buoys. | |||||||||||||||
Available in lengths of 6ft - 100ft, and depths of 2ft - 100ft |
|
|||||||||||||||
| Tough-Guy® Staked Barriers are continuous fabric panels used to contain run-off on the site or direct it to retention devices. The fabric curtain has a heat sealed hem along the top edge and is available 26in or 44in wide. Stakes are sold separately. | ||||||||||||||||
Available in lengths of 6ft - 100ft, and depths of 2ft - 100ft |
 |
|||||||||||||||
|
||||||||||||||||
| Tough-Guy® 1.m Floating Barriers are built identical to Type 1.e but with smaller 4in x 4in x 4ft floatation logs. | ||||||||||||||||
Available in lengths of 6ft - 100ft, and depths of 2ft - 20ft |